Rega Aethos Integrated Amplifier

KEY FEATURES:

• 156 W per channel into 6 Ω (125 W per channel into 8 Ω)
• Dual mono design
• 5 Line inputs
• Headphone socket
• Remote control
• Direct input
• Record out
• Pre-amp out

Power outputs at rated 230/115 V supply voltage:

• 125 W RMS both channels driven into the rated load of 8 Ω
• 156 W RMS both channels driven into 6 Ω
• Note: Continued high level use into 6 Ω may cause the case to exceed 40 °C above the ambient temperature and activate the thermal shutdown.

Headphone output:

• No load 12.5 V
• 32 Ω 2.7 V
• 54 Ω 4 V
• 300 Ω 9 V
• Source impedance 109 Ω

Record output:

• Record output level (with rated input levels) 219 mV
• Record output impedance 560 Ω

Pre-amp output:

• Pre-amp output level (with rated input levels) 840 mV
• Pre-amp output impedance 100 Ω

Input sensitivities for rated output level:

• Input 1-5 and record input sensitivity 224 mV @ 17 kΩ
• Maximum input level 11.5 V (record output amplifier overload point)
• Direct input sensitivity 840 mV @ 50 kΩ
• Power amplifier gain 31.6 dB

Frequency response @ 100 W into 8 Ω:

• Line input 1-5 and record 10 Hz (-0.8 dB point) to 30 kHz (-0.5 dB point)
• Direct input 10 Hz (-0.8 dB point) to 50 kHz (-0.5 dB point)

THD+Noise @ 100 W into 8 Ω:

• Direct input (Power amplifier only) Typically 0.007% @ 1kHz (measurement bandwidth 22 Hz to 30 kHz)

Line input Typically 0.007% @ 1kHz (measurement bandwidth 22Hz to 30KHz)

• Power consumption Maximum output: 415 W @ 230 V / 220 V / 115 V / 100 V into the rated load of 124 W RMS into 8 Ω

Fuse ratings T3.15 AL 250 V - 230 V/ 50 Hz and 220 V / 60 Hz

• 3 AL 250 V - 115 V / 60 Hz and 100 V 50/60 Hz

Dimensions

• W 433 mm x H 95 mm x D 360 mm (including speaker terminals)

Weight

• 5 kg