Skip to content
Showrooms open by appointment — click here to book a consultation.
Showrooms open by appointment — click here to book a consultation.

Audioengine HD3 Wireless Active Speaker (Pair)

Original price €399.00 - Original price €399.00
Original price €399.00
€399.00
€399.00 - €399.00
Current price €399.00
Color: Walnut
Available to order (with lead time)
For latest lead times or to put down a deposit please contact us
In a rush? See what's available for immediate dispatch

Our most-versatile speakers with wireless that works. HD3 works with all your apps, music, and devices so no matter how you listen, HD3 has you covered. The ultimate mini music system. With support for the aptX HD audio codec built in, you can enjoy truly high resolution audio with all the convenience of a Bluetooth connection.

HIGHLIGHTS

  • For your desktop or smaller spaces but will easily fill a room
  • Wireless that works with all your devices and apps
  • Support for the aptX HD audio codec.
  • High-end sound with great looks and hand-built wood cabinets
  • Simple setup, no receiver needed
  • No buttons to push & inputs are always ready to go
  • Front panel volume control and headphone jack

THE ULTIMATE MINI MUSIC SYSTEM

Our HD Series was designed for the way people listen to music today— streaming wirelessly, digital downloads, vinyl, etc. HD3 sets a new standard for compact mini music systems because of its versatility and ability to play all of your music from any device.

NO MISSED CONNECTIONS

Connect to HD3 any way you like: wirelessly or wired, digital or analog. Stream your music library, TIDAL, Spotify, Pandora, YouTube, etc. to HD3 from just about anywhere in your house without dropouts. Wireless setup is a breeze and only takes about a minute. And if you’re using HD3 on your desktop, connect up with a USB cable. The USB input bypasses your computer’s built-in low-quality headphone jack for a high-end listening experience. But if you’re not keen on USB or wireless you can still use any audio cable to connect.

YOUR GO-TO SYSTEM

Easy setup, simple and useful features, and wide stereo sound make HD3 your go-to music system. HD3 is expandable, so if you want deeper bass just connect up your subwoofer. No matter how you listen to music, HD3 has you covered.

PLUG IN YOUR HEADPHONES

HD3 includes a dedicated high-performance headphone output so you can listen and not wake the neighbors. Its audiophile-quality headphone amplifier delivers high-end sound that drives even the most-demanding headphones.

RETRO-FORWARD DESIGN

HD3 was designed for audio performance, but speakers obviously also need to look good so we’ve included furniture-grade wood veneers, aluminum trim accents, and detachable magnetic grills that blend with any decor. Available in Satin Black as well as real Walnut and Cherry wood at no additional cost if you want to really show them off.

SMALL SPEAKERS THAT PACK A PUNCH

Built-in power amplifiers save space and eliminate the need to connect HD3 to a stereo receiver or external power amp. Simply plug the left speaker into a power outlet and connect the included speaker wire from the left to the right speaker. All internal components of the HD3 are designed and tuned together, so you’ll get Audioengine’s Signature Sound and a much more efficient system than traditional separate speakers and amplifier.

General Specifications
Type 2.0 powered multimedia speaker system
Amplifier type Dual analog class A/B monolithic
Power output 60W peak power total (15W RMS / 30W peak per channel), AES
Drivers 2.75" Kevlar woofers, 3/4” silk dome tweeters
Inputs 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth
Outputs RCA variable line-out
3.5mm mini-jack headphone out
Mains voltages 110-240V 50/60Hz auto-switching
SNR 95dB (typical A-weighted)
THD+N <0.05% at all power settings
Crosstalk <50dB
Frequency response 65Hz-22kHz ±2.0dB
Freq. response w/bass reduction switch selected 100Hz-22kHz ±2.0dB (-5dB down)
Input impedance 5K ohms unbalanced
Headphone Amp Specifications
Headphone amp type OPA2134
Full-scale headphone output level 2.0V RMS
Output impedance 2 ohms
Recommended headphone impedance range 10 ohms to 10K ohms
Bluetooth Specifications
Internal D/A converter PCM 5102
Input bit depth 24-bits, upsampled
Bluetooth receiver type Bluetooth 4.0 audio
Supported codecs aptX, AAC, SBC
Wireless operation range Up to 100ft (30m) typical
Input data rate Determined by Bluetooth
Wireless latency ~30 milliseconds (ms)
USB Specifications
Connector type Micro-USB
USB device class USB 1.1 or above
Internal D/A converter PCM 5102
Input bit depth 24-bits, upsampled
Input data rate 44.1KHz/48KHz
Protection Output current limiting
Thermal over-temperature
Power on/off transient protection
Dimensions (each) 7”(H) x 4.25”(W) x 5.5”(D)
Weight (LEFT speaker) 1.8Kg/4lbs
Weight (RIGHT speaker) 1.5Kg/3.4lbs
Shipping weight 4.5kg/10lbs per pair
Shipping box dimensions 11.6 (29.5cm)H x 11.75 (30cm)L x 8.8(22.5cm)W
Materials and construction 18mm thick MDF cabinets with real wood veneer
3/4" (20mm) silk dome tweeters with neodymium magnets
2.75" Kevlar woofers with advanced voice coils
Included Accessories
What's In The Box HD3 powered (left) speaker
HD3 passive (right) speaker
Antenna
Speaker wire (16AWG), 2 meters (~6.5 feet)
Power supply
AC power cable
Mini-jack audio cable, 1.5 meters (~5 feet)
USB cable, 1.5 meters (~5 feet)
Microfiber speaker bags
Microfiber cable bag
Microfiber power supply bag
Quickstart guide
Product line brochure
Visit our showrooms

Visit our showrooms

We know that there's nothing quite like seeing, hearing and feeling what a product is really like. Whether you're investigating a specific product or want to compare within a category, we can help.

Our experts teams will ensure that you have the best advice and products to choose from. Our Dublin Showroom is conveniently located with free parking. All with no obligation to buy.

Book a free personal consultation now
Custom Smart Home Installations

Custom Smart Home Installations

Your Home. Simplified

Learn more