

ASYMMETRICAL DOUBLE-BALANCED GEOMETRY
Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.
METAL-LAYER NOISE-DISSIPATION
It's easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. Noise-Dissipation "shields the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to the ground.
COLD-WELDED, GOLD-PLATED TERMINATIONS
This plug design allows for a connection devoid of solder, which is a common source of distortion. Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
SOLID LONG-GRAIN COPPER (LGC) CONDUCTORS
Solid Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular OFHC (Oxygen-Free High-Conductivity) copper. Solid conductors prevent strand interaction, a major source of distortion. The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor, and for the magnetic fields outside the conductor. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
FOAMED-POLYETHYLENE INSULATION
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.

Visit our showrooms
We know that there's nothing quite like seeing, hearing and feeling what a product is really like. Whether you're investigating a specific product or want to compare within a category, we can help.
Our experts teams will ensure that you have the best advice and products to choose from. Our Dublin Showroom is conveniently located with free parking. All with no obligation to buy.
Blog posts
-
How to Choose the Right Cartridge for Your Turntable
Read nowWhat is a Phono Cartridge? In layman’s terms, a turntable works by dragging a small diamond through the grooves of your vinyl. The cartridge is a type of transducer, whose job is to turn the resulting vibrational energy into...
-
Whole Home Audio Systems - Everything You Need To Know
Read nowSo you want music in the kitchen and the living room but don't know where to start? How to plan for a multiroom system; Speaker types (recessed, shelf/wall mount, soundbar); how many zones; type of use - high performance, background...
-
How to Balance Your Tonearm
Read nowPlus, what does anti skating mean and other important questions answered. What Does Anti Skating Mean? In a nutshell, the anti-skate feature on your turntable stops your tonearm from skating across the centre of your record as it comes...
